LG LMV1762SB Service Manual page 36

B. REMOVING THE OUTER CASE(Figure 8)
(1) Remove the vent grille by removing the two screws
securing it to the outer case.
(2) Remove the two screws securing it to the air duct.
(3) Remove the mounting plate by loosening the screws
(1 or 2 screws) securing it to the outer case.
(4) Remove two screws on the left central edge and
one screw on the right central edge of the base plate.
Remove the fan bracket from the outer case by
removing one screw securing it to the outer case.
(5) Remove six screws of the rear cavity.
(6) Remove the outer case.
Figure 8
-36-
Fan Bracket
Power Cord