Specification - LG 43LJ5000-UB Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LED TV used
MS3553.PB765 chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Model General Specification
No. Item
1 Receiving System
2 Promramme coverage
3 Input Voltage
4 Screen Size
5 Aspect Ratio
6 Module
Component & Com-
7
posite Input
8 HDMI Input
9 USB
Copyright ©2017 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

NTSC-M, ATSC
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : US 01~135
5) CADTV : US 01~135
AC 120V~, 60Hz
43 inch Wide (1920 ×1080)
16:9
LCM Model No. Panel Model No.
BOEI430WU1 HV430FHB-N40
Component + AV
HDMI2
HDMI1
USB
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CB, IEC specification
- EMC : CE, IEC/CISPR
Specification
Panel Maker Resolution
BOE FHD
- 6 -
Remarks
Frame Rate
60 Hz
Bottom : CVBS(Y), Pb, Pr
Bottom : Audio L/R
Side
Bottom
Side (USB 2.0)
LGE Internal Use Only