Power Adapters; Lcd Monitor Quality And Pixel Policy - HP 2011x User Manual

Power Adapters

Table B-9 Power Adapters
Manufacturer
TPV Technology Group
LiteOn
APD, Asian Power Devices, Inc.
Delta

LCD Monitor Quality and Pixel Policy

Your LCD monitor uses high-precision technology, manufactured according to high standards, to help
guarantee trouble-free performance. Nevertheless, the display might have cosmetic imperfections that
appear as small bright or dark spots. This is common to all LCD monitor displays used in products
supplied by all vendors and is not specific to your LCD monitor. These imperfections are caused by one
or more defective pixels or subpixels.
A pixel consists of one red, one green, and one blue subpixel. A defective whole pixel is always turned
on (a bright spot on a dark background), or it is always off (a dark spot on a bright background). The
first is the more visible of the two. A defective subpixel (dot defect) is less visible than a defective whole
pixel, and is small and only visible on a specific background.
To locate defective pixels, the monitor should be viewed under normal operating conditions and in
normal operating mode at a supported resolution and refresh rate, from a distance of approximately
50 cm (16 in). We expect that, over time, the industry will continue to improve its ability to produce
displays with fewer cosmetic imperfections, and we will adjust guidelines as improvements are made.
For more information about your LCD monitor and pixel policy, refer to the HP Web site at:
www.hp.com/support. To find pixel policy information on the HP Web site, type in "HP Pixel Policy" in
the search box and press Enter.
ENWW
Model Number
ADCP1236
PA-1041-11TA-LF
DA-36N12, DA-50F19
ADP-40DD B Series
Power Adapters 35