Table of Contents
Advertisement
Easy Start Guide
Inserting an SD card
Prepare an SD card
(commercially available).
Turn off the camera and insert an
SD card.
Compatible SD/SDHC cards
(Z p. 17)
Charge the battery before recording
Turn off the camera and attach the battery pack.
Access lamp
Blinks: Accessing files
Do not remove
the AC adapter,
the battery pack
or the SD card
when the lamp is
blinking.
The battery pack is not charged
at the time of purchase.
! Attach the battery
# Close the monitor
Before removing the battery pack, be sure to turn off the power by
pressing DISPLAY/< for 2 seconds or more.
CAUTION
•
Be sure to use JVC battery packs. If you use any other battery packs besides
JVC battery packs, safety and performance can not be guaranteed.
EN
SD card (label)
Q Open the
R Insert
slot cover
Grip Adjustment
NOTE
•
Fasten the strap when you grip the camera.
•
When carrying the camera, please be
careful not to drop it.
Power/charge lamp
Blinks: Charging or quick start-up
Goes out: Charging finished
AC Adapter to AC Outlet
(110 V to 240 V)
$ Connect the AC adapter
(Charging starts)
Open the cover
Advertisement
Table of Contents
