Yamaha XJR1300M Owner's Manual page 63

PERIODIC MAINTENANCE AND MINOR REPAIR
WARNING
@
After extensive tests, the tires
mentioned below have been ap-
proved by Yamaha Motor Co.,
Ltd. for this model. No guaran-
tee for handling characteristics
can be given if tire combina-
tions other than what is ap-
proved are
motorcycle. The front and rear
tires should be of the same
manufacture and design.
The use of tire valves and valve
6
cores other than listed below
could cause tire deflation dur-
ing extreme high speed riding.
Always use genuine parts or
their equivalent for replace-
ment.
Be sure to install the valve caps
securely, as these are important
to prevent air pressure leakage
during extreme high speed
riding.
@
EW000080 CE-10E
FRONT
Manufacturer
DUNLOP
BRIDGESTONE 120/70ZR17 (58W)
MICHELIN
REAR
Manufacturer
DUNLOP
BRIDGESTONE 180/55ZR17 (73W)
MICHELIN
used on this
CE-12E
Tire valve
Valve core
Size Type
120/70ZR17 (58W) D207F
BT57F
120/70ZR17 (58W) MACADAM90X
Size Type
180/55ZR17 (73W) D207
BT57R
180/55ZR17 (73W) MACADAM90X
Type
TR412
#9000A (original)
6-15
WARNING
@
This motorcycle is fitted with super
high-speed running tires. The fol-
lowing points must be observed in
order for you to make fully effective
use of these tires.
Never fail to use the specified
tires in tire replacement. Other
tires may have a danger of
bursting at super high-speeds.
New tires have a relatively low
grip on the road surface until
they have been slightly worn.
Therefore, approximately 100 km
should be traveled at normal
speed before any high-speed
riding is done.
Before any high-speed runs, the
tires should be warmed-up suf-
ficiently.
Always inflate to the correct tire
pressure according to the oper-
ating conditions.
@
EAU00684