Yamaha XJR1300M Owner's Manual page 57

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Oil filter element
2. O-ring (× 2)
6. Install the new oil filter element
and O-ring.
6
1. Projection
2. Slot
7. Align the projection on the filter
cover with the slot in housing and
install the filter cover.
8. Tighten the oil filter bolt and oil fil-
ter drain screw to the specified
torque.
Tightening torque:
Oil filter bolt:
15 Nm (1.5 m·kg)
Oil filter drain screw:
7 Nm (0.7 m·kg)
NOTE:
@
Make sure the O-rings are seated prop-
erly.
@
6-9
9. Fill engine with oil. Install the oil fill-
er cap and tighten.
Recommended oil:
See page 8-1.
Oil quantity:
Total amount:
4.2 L
Periodic oil change:
3.0 L
With oil filter replacement:
3.35 L
CAUTION:
@
Do not put in any chemical addi-
tives. Engine oil also lubricates
the clutch and additives could
cause clutch slippage.
Be sure no foreign material en-
ters the crankcase.
@
EC000066