Using Hp 3D Driveguard Software - HP ProBook 6440b User Manual

Using HP 3D DriveGuard software

The HP 3D DriveGuard software enables you to perform the following tasks:
●
Enable and disable HP 3D DriveGuard.
NOTE:
privileges. Members of an Administrator group can change privileges for non-Administrator users.
●
Determine whether a drive in the system is supported.
To open the software and change settings, follow these steps:
1. In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.
– or –
Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard.
If prompted by User Account Control, click Yes.
2. Click the appropriate button to change settings.
3. Click OK.
Permission to enable or disable HP 3D DriveGuard is dependent on certain user
Using HP 3D DriveGuard 91