Remote Control Operation Instructions - Empire Comfort Systems DVP48FP30 Installation Instructions And Owner's Manual

REMOTE CONTROL OPERATION INSTRUCTIONS

NOTICE: ON/OFF rocker switch must be ON for the remote to
operate.
FEATURES:
Main Burner ON/OFF
Main Burner flame modulation (6 levels)
Choice of standing or intermittent pilot
Thermostat or Smart thermostat functions
On/Off relay*
Comfort Fan speed modulation (6 levels)
Accent Light modulation (6 levels)
THERMOSTAT
OFF/ON/SMART
REMOTE CONTROL INFORMATION
Supply Voltage: 4.5 V (three 1.5 V AAA batteries)
Ambient Temperature Ratings: 0 - 50°C (32 - 122°F)
Radio Frequency: 315 MHz
NOTICE: THE TRANSMITTER AND RECEIVER ARE RADIO
FREQUENCY DEVICES. PLACING THE RECEIVER IN OR
NEAR METAL SEVERELY REDUCES THE SIGNAL RANGE.
NOTICE: TURN "OFF" THE MAIN GAS SUPPLY OF THE APPLI-
ANCE DURING INSTALLATION OR MAINTENANCE OF THE
RECEIVER DEVICE.
NOTICE: FOR INSTALLATION/MAINTENANCE, SWITCH OFF
THE INSERT BY REMOVING MAIN POWER SUPPLY AND BAT-
TERIES IF INSTALLED.
39359-4-0320
TRANSMISSION
FLAME ON
COMFORT FAN
KEY LOCK
LOW BATTERY INDICATOR
ACCENT
LIGHT
Figure 76b
• FIRE HAZARD. Can cause severe injury or death.
• The Transmitter causes ignition of the appliance. The
appliance can turn on suddenly.
• Keep away from the appliance burner when operating
the remote system.
Blue LCD display
ON/OFF Button
THERMOSTAT Button
UP/DOWN Arrow Button
MODE Button
Figure 76a
ROOM
TEMPERATURE
CPI MODE
WARNING
Page 57