5.9 LED Board
LED board (includes cable)
1. Prepare the notebook for disassembly (refer to
2. Remove the switch cover (refer to
3. Release the zero insertion force (ZIF) connector 1 to which
the LED board cable is connected and disconnect the cable.
4. Remove the PM2.0×4.0 screw 2 that secures the LED board
to the top cover.
5. Lift the left side of the LED board 3 until the board
disengages from the alignment pins 4 on the top cover.
Releasing the LED Board
Maintenance and Service Guide
Spare Part Number Information
Removal and Replacement Procedures
Section
378771-001
Section
5.3).
5.8).
5–19