Replacing The Light Bulb - GE GIE21G Owner's Manual And Installation Instructions

Care and cleaning of the refrigerator.

Replacing the light bulb.

Setting the refrigerator control to OFF does not remove power to the light circuit.
10
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move the
refrigerator control to the OFF position and
clean the interior with a baking soda solution of
one tablespoon (15 ml) of baking soda to one
quart (1 liter) of water. Leave the doors open.
Preparing to Move
Secure all loose items such as grille, shelves
and drawers by taping them securely in place
to prevent damage. To prevent the doors from
opening while moving, secure them to the case
with tape.
CAUTION
Light bulb may be hot.
Unplug the refrigerator.
The bulb is located at the top of the
compartment near the opening.
Set the icemaker power switch to the OFF
position and shut off the water supply to the
refrigerator.
If the temperature can drop below freezing,
have a qualified servicer drain the water supply
system (on some models) to prevent serious
property damage due to flooding.
Be sure the refrigerator stays in an upright
position during moving.
Replace with an appliance bulb of the
same or lower wattage.
Plug the refrigerator back in.