Assembly
Two people are recommended for assembly.
CAUTION:
1
Attac
hing the casters
□
Be sure the drawers are locked and lay the cabinet (A)
□
t A
a t
h c
t
e h
s
w
v i
l e
side as the handle, inserting bolts ( AA) through the swivel
casters (D) and into the cabinet (A).
□
Tighten with a hex key (CC) or 12mm socket.
□
Repeat this process for the xed casters (C) on the
opposite side of the cabinet (A).
□
Return the cabinet (A) to its upright position.
Do not over tighten the bolts.
CAUTION:
3
Attaching the cabinet handle
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (BB) and tighten with a
hex key (CC).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
a c
t s
r e
( s
) D
o t
t
e h
n u
, t i
n o
t
A
D
AA
2
Attac hing the pegboard
□
Remove bolt from pegboard (E). Bolt is no longer needed.
□ Lift up pegboard to upright position.
□
Position the support arm (F) over the holes on pegboard (E)
and cabinet (A).
□
Attach with the bolts (BB) and tighten with a hex key (CC).
□
Repeat this process on the opposite side of pegboard (E).
e h
a s
m
e
A
6
E
BB
A
E
B
A
F
BB