Table of Contents
Advertisement
For daily recording
: To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
repeatedly to select "MO-FR".
For everyday recording
the same time on the same channel everyday. While the
month digit is flashing, press
"MO-SU".
For weekly recording
same time on the same channel every week. While the
month digit is flashing, press
"W-MO" (example: every Monday).
5) Press
or
repeatedly until the relevant start hour
K
L
appears. Next, enter the minute digit.
6) Press
or
repeatedly until the relevant end hour
K
L
appears. Next, enter the minute digit.
7) Press
or
repeatedly until the relevant channel number
K
L
appears.
8) Press
or
repeatedly until the desired tape speed
K
L
appears.
9) Press
. Programme is now completed.
B
•To set another timer programme, repeat steps
10)Press
SETUP
to exit.
11)Press
T-SET
to activate a Timer Recording.
•If the unit switches to the DVD mode after pressing
T-SET
, the
indicator will not light up. The
indicator will light up when the unit is turned off by
STANDBY-ON
pressing
•If the unit is turned off after pressing
indicator will light up.
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme Which Has Already
Started
STOP/EJECT
Press
on the unit.
Note: • STOP
on the remote control will not function in the
C
Timer Recording mode.
To Correct Timer Programmes
If the unit is already in timer standby mode, press
STOP/EJECT
on the front panel or
control to exit from the standby mode.
1) Repeat steps
1)
to
3)
in the "Timer Recording".
2) Select the setting you want to change using
3) Enter the correct numbers using
4) Press
SETUP
to exit.
5) Press
T-SET
to return to timer standby mode.
To Cancel or Check the Start/End Time
If the unit is already in timer standby mode, press
STOP/EJECT
on the front panel or
control to exit from the standby mode.
1) Repeat steps
1)
to
2)
in the "Timer Recording".
2) Select the programme number you want to check using
or
. The details of selected programme appears on the
L
TV screen. You may cancel the entire programme by
pressing
.
s
3) Press
SETUP
to exit.
: To record a TV programme at
or
repeatedly to select
K
L
: To record a TV programme at the
or
repeatedly to select
K
L
.
T-SET
, the
TIMER NUMBER
DATE
START
END
CHANNEL
SPEED
T-SET
on the remote
or
s
or
, then press
K
L
T-SET
on the remote
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
or
is under execution.
K
L
Programme 1
Programme 2
Programme 3
Hints for OTR and Timer Recording
VCR
• Press
Recording. Make sure the unit is in the VCR mode, then
T-SET
press
• If a tape is not in the unit or does not have the erase-
prevention tab, the
Recording cannot be performed. Please insert a recordable
tape.
• When Timer Recordings are set, the
up. To use the VCR as usual until the time for the
recording, press
3)
9)
to
.
Select either VCR or DVD mode, then continue with the
other features as described in this manual.
After an OTR and a Timer Recording has been set,
this unit operates as follows:
• If a tape runs out before an OTR or a Timer Recording is
finished, the unit ejects the tape and switches to the DVD
mode automatically. If the DVD power is off, the unit does
not switch to the DVD mode but goes into the timer
standby mode. Press
1
STOP/EJECT
--/--
--:--
VCR function again.
--:--
--
• Once the unit turns to the timer standby mode, no VCR
--
functions are available until
the front panel and
function.)
• To cancel the timer standby mode, press
remote control or
VCR
to activate the VCR function again.
• Press
VCR
desired mode before you operate.
When an OTR or a Timer Recording is completed...
• If Auto Power Off for DVD has been activated and there
are Timer Recordings on standby, the unit turns off
automatically, and the
lights up to indicate the unit is in the timer standby mode.
.
B
• The
.
B
more Timer Recordings on standby.
• If Auto Power Off for DVD has NOT been activated, the
unit switches to the DVD mode and all the VCR function
will be unavailable. The
long as the DVD is in use. All the DVD functions are
available during OTR, timer standby mode and Timer
Recording.
K
14
9:00
10:00
on the remote control before you set Timer
.
indicator flashes and Timer
T-SET
so that the
T-SET
on the remote control or
on the unit, then press
T-SET
VCR
on the remote control will not
STOP/EJECT
on the unit, then press
or
DVD
on the remote control to select your
indicator on the front panel
indicator on the front panel flashes if there are no
indicator will not light up as
11:00
indicator will light
indicator lights off.
VCR
to activate the
OUTPUT
is pressed. (
on
T-SET
on the
EN
Advertisement
Table of Contents
