Samsung ML-2851ND/SEE Service Manual page 76

Digital laser printer
Table of Contents

Advertisement

5) Light Image
Description: The printed image is light, with no ghost.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
stained when the toner of toner
cartridge is almost consumed.
between the high voltage terminal in
(Run self-test and check 1~4)
Service Manual
Alignment & Troubleshooting
1. Develop roller is
2. Ambient temperature
is below than 10°C.
3. Bad contact
caused by the toner stains
the HVPS and the one
in the set.
4. Abnormal output
from the HVPS.
Check if the Toner Save mode is off.
Check if the density is light.
No 1 : Replace the toner cartridge
and try to print out.
No 2 : Wait 30 minutes after printer
is powered on before you
start printing.
No3 : Clean up the contaminated
area by the toner.
Replace the HVPS if the
problems are not solved by the
above four instructions.
4-26
Samsung Electronics

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml-2850dMl-2851ndMl-2850 series

Table of Contents