Table of Contents
Advertisement
14.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press Start Nachlegen and, at
2.
the same time, turn the pro-
gramme selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
To change the value, press
4.
Trockenzeit / Fertig in .
To save the changes, switch off
5.
the appliance.
15 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on siemens-home.bsh-
group.com .
Cleaning and servicing en
15.1 Tips on cleaning and
care
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
15.2 Base unit
The base unit is the accessible area
at the bottom of the appliance in
which you will find the heat ex-
changer.
Opening the base unit
Requirements
¡ The appliance has cooled down
for 30 minutes.
¡ The appliance door is closed.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
33
Advertisement
Table of Contents
