Table of Contents
Advertisement
Projector Indicator Status
Indicator and status
Problem and solutions
Power: Off
Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
Laser: Off
with dust or obstructed by nearby objects.
Temp: Lit orange
• Make sure the environmental temperature is not too
hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector menu.
s Settings > Installation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue
Laser warning.
Status: Indicator status
Turn the projector off, unplug it, and contact Epson for
varies
help.
Laser: Flashing orange
Temp: Indicator status
varies
Power: Off
Laser has a problem.
Status: Flashing blue
Turn the projector off, unplug it, and contact Epson for
help.
Laser: Lit orange
Temp: Off
Power: Off
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help.
Status: Flashing blue
Laser: Off
Temp: Flashing orange
Power: Off
Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Laser: Flashing orange
Temp: Off
g g Related Links
• "Projector Feature Settings - Settings Menu"
• "Cleaning the Air Filter and Vents"
p.61
p.71
• "Replacing the Air Filter"
p.71
76
Advertisement
Table of Contents
