D-Link DXS-1210 Series Hardware Installation Manual page 27

DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
Feature
Switching Capacity
MAC Address Table
Transmission Method
Packet Buffer
Packet Forwarding
Rate
(Maximum)
Priority Queues
Link Aggregation
Static Routes
Access Control List
(ACL) Entries
Feature
Console Port
RJ45 Ports
Performance Specification
Description
DXS-1210-28T 680 Gbps
DXS-1210-28S 560 Gbps
Up to 32K entries (256 static MAC addresses)
Store and forward
DXS-1210-28T 4 MB
DXS-1210-28S 4 MB
DXS-1210-28T 505.92 Mpps
DXS-1210-28S 416.64 Mpps
Supports the following:
 Maximum of 8 Priority Queues per port
Supports the following:
 Maximum of 8 groups per device
 Maximum of 8 ports per group
Supports the following:
 Maximum of 128 static IPv4 routes (shared with IPv6)
 Maximum of 64 static IPv6 routes (shared with IPv4)
Supports the following:
 Maximum of 1536 ingress ACL entries
 Maximum of 1024 egress ACL entries
Port Type Specifications
Description
The RJ45 console port provides out-of-band access to the CLI using the following
settings:
Baud Rate 115200 (default), 19200, 38400, and 9600 bps
Data Bits 8
Stop Bit 1
Parity None
Flow Control None
The RJ45 Ethernet ports provides in-band access to SNMP, the CLI and Web UI,
interconnect nodes, and support the following standards and features:
Standards IEEE 802.3u (100BASE-TX)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3an (10GBASE-T)
IEEE 802.3az (Energy-Efficient Ethernet)
IEEE 802.3x (Full-Duplex, Flow Control)
The following features are supported on the RJ45 ports:
 Full-duplex operations on 100BASE-TX ports
 Head-of-line blocking prevention
 Manual/auto MDI/MDIX configuration
 Auto-Negotiation for each port
22