Oster BLSTEG7827 Series Instruction Manual page 12

LE ARN I N G A B O U T YOUR A PPLIA NC E
ASSEMBLING YOUR BLENDER
1.
1. Turn jar upside down so the small opening is at the top. Place sealing ring over
jar opening.
2. Place blade into jar.
3. Snap threaded bottom disc and collar together. Place collar over blade and jar.
(Note: If there are slots on top of collar, line them up with notches on jar.) Place
the collar on jar and turn the threaded bottom disc clockwise to tighten.
4. Place jar assembly onto base.
SELECTING THE SPEED
Slide switch to s High or t Low (if your model does not have a slide switch, push the
s High or t Low button.)
Push desired speed and blend ingredients to desired consistency.
Push off button "O" to stop the blender and turn blender off.
To use pulse , select s High or t Low. Push
" "
of time. Release
"
TIP: Refer to the "Guide For Processing Foods in Blender".
Use the "PULSE" button (rapid pulse) to crush ice and use the "pulse" button (slow pulse)
to prepare sauces. The maximum continuous operation time is 5 seconds.
2.
and allow blade to stop. Repeat cycle as desired.
"
3.
and hold down for desired length
" "
En gl ish -4
4.