Technical Data - DeWalt DWE4357 Original Instructions Manual

SMALL ANGLE GRINDERS
DWE4347, DWE4357, DWE4369
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Power input
No-load speed
Rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight
* weight includes side handle and guard
Noise and vibration total values (triax vector sum) according to EN60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a =
h,DS
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
DWE4347
V 230
AC
1
W 1700
min -1 10500
min -1 10500
mm 125
mm 6.0
M14
mm 18.5
kg 2.39
dB(A) 89
dB(A) 100
dB(A) 3
m/s² 5.8
m/s² 1.5
m/s² 2.5
m/s² 1.5

CAUTION: Working with the wire brush or the abrasive
cutting can lead to different vibration levels!
EC-Declaration of Conformity
Machinery Directive
Small Angle Grinders
DWE4347, DWE4357, DWE4369
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
3:2011+A2:2013+A11:2014 +A12:2014+A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
English
WALT one of the
e
DWE4357 DWE4369
230 230
1 1
1700 1700
2200–10500 1800–8000
10500 8000
125 125
6.0 6.0
M14 M14
18.5 18.5
2.41 2.53
89 88
100 99
3 3
5.8 4.1
1.5 1.5
2.5 3.3
1.5 1.5
WALT at
e
WALT.
e
3