Using Sound; To Change Speaker Volume; To Connect A Microphone, Speakers, Or Headphones - HP OmniBook 800 User Manual

Hp omnibook 800: users guide

Hide thumbs Also See for OmniBook 800:

Table of Contents

Replace the RAM card battery yearly.

When you want to replace a RAM card battery, plug the card into the

OmniBook and make sure the OmniBook stays turned on while you

replace the battery. Otherwise, the data on the card will be lost.

To use an SRAM card, you must first load drivers for it. Refer to the

online Help for Windows 95.

Using Sound

Your OmniBook supports Sound Blaster PRO-compatible sound (16-bit

stereo).

This section shows how to

Adjust the speaker volume.

Connect a microphone, speakers, or headphones.

Play and record sounds.

The speaker volume setting controls loudness for all sounds except

Appointment Book alarms.

You can adjust the volume using these methods:

Hold FN and press UP ARROW or DOWN ARROW as needed to

gradually increase or decrease the volume.

Press FN+SPACEBAR to mute the sound (or to turn it back on).

Click the speaker symbol in the taskbar to display the Volume panel,

then drag the main volume control.

Double-click the speaker symbol in the taskbar to display the Volume

Control panel for advanced control of different sound inputs.

Your OmniBook has a built-in microphone above the keyboard and two

speakers. Although the OmniBook has stereo sound, both built-in speakers

play a mix of the right and left channels. You can also plug in an external

microphone, external speakers or headphones, and a stereo input source.

Table of Contents