Warning Indicators On Or Flashing; Pgm-Fi (Programmed Fuel Injection) Malfunction Indicator Lamp (Mil); Abs (Anti-Lock Brake System) Indicator - Honda CBR300R Manual

Hide thumbs Also See for CBR300R:
Table of Contents

Advertisement

Warning Indicators On or Flashing

PGM-FI (Programmed Fuel
Injection) Malfunction Indicator
Lamp (MIL)
If the indicator comes on while riding, you
may have a serious problem with the PGM-FI
system. Reduce speed and have your
motorcycle inspected by your dealer as soon
as possible.
ABS (Anti-lock Brake System)
Indicator
CBR300RA only
If the indicator operates in one of the
following ways, you may have a serious
problem with the brake system. Reduce your
speed and have your motorcycle inspected by
your dealer as soon as possible.
Indicator comes on or starts flashing while
riding.
Indicator does not come on when the
ignition switch is in the ON position.
Indicator does not go off at speeds above
6 mph (10 km/h).
If the ABS indicator stays on, your brakes will
continue to work as a conventional system,
but without the anti-locking function.
The ABS indicator may flash if you turn the
rear wheel while your motorcycle is lifted off
the ground. In this case, turn the ignition
switch off and then on again. The ABS
indicator will go off after your speed reaches
19 mph (30 km/h).
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbr300ra

Table of Contents