Removing & Installing Body Components; Battery - Honda CBR300R Manual

Removing & Installing Body Components

Battery

Negative
terminal
Battery
❙
Removal
Make sure the ignition switch is off.
1. Remove the front seat.
50
Bolt Positive
terminal
Battery holder
P. 53
2
2. Remove the battery holder by removing
the bolt.
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock is set to the proper time
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead"
terminal from
-
terminal from
+
+
P. 21
2
P. 39
2
P. 94
2