Troubleshooting And Repair - HP OmniBook 5000 Familiarization Manual

Troubleshooting and Repair

The floppy drive module F1195A will not work on the dock parallel port - only on the
OmniBook parallel port.
The OmniBook 5500 PCMCIA ports are not accessible when docked in the F1189A Docking
System - use the F1189B.
To update an F1189A to an F1189B, the Case Deck Assy must be replaced.
The PCMCIA slots on the OmniBook 5500 are positioned 7mm closer to the back of the
computer than the OmniBook 5000. This difference causes a physical interference when
adding/removing cards in the PCMCIA slots while docked in the F1189A (see diagram
below). The update will accommodate the case deck assembly plastic change which
eliminates this interference.
F1189B
F1189A
To update the Docking System, replace the Case Deck Assy, and the two Screw Covers..
Upon completion of the update, use a black permanent marker and an arrow and the letter
"B" next to "F1098A." The regulatory label should appear as "F1098A B" on the bottom of
the product.
__________
12