Reset The Omnibook; Open The Omnibook - HP OmniBook 5000 Getting Started

3. Reset the OmniBook

Press the reset button.
Insert a pen or pencil tip or other slender object into the small opening below
the ac adapter socket on the left side of the computer.
The OmniBook may take half a minute (or more) to restart (reboot).
Pressing the reset button is similar to turning off a PC's power, then turning it back
on again. After this first time, you should seldom have to press the reset button. (For
example, you may need to reset if the battery becomes completely exhausted.)
Make sure there's no disk in the floppy disk drive when you reset the OmniBook. As
on a PC, if there's a disk present, the OmniBook won't look on the built-in disk for its
startup files, so it may not restart successfully.

4. Open the OmniBook

Pull the two latches on the right and left sides of the OmniBook toward you and lift
the lid away from the keyboard.
Starting Out with Your OmniBook
Start Here
1-5