Starting And Stopping The Omnibook; To Start And Stop The Omnibook - HP OmniBook 4100 User Manual

3. Press the blue power button to turn on the OmniBook.
When the OmniBook is plugged into ac power and a battery is installed, it
automatically recharges the battery. To check the status of the battery, see
"Checking the Status of the OmniBook."

Starting and Stopping the OmniBook

To start and stop the OmniBook.

To reset the OmniBook.
To transport the OmniBook.
To start and stop the OmniBook
You can easily start and stop your OmniBook using the
However, you may want to take advantage of the power modes, which provide
alternative methods for stopping your OmniBook—depending on power
considerations, types of active connections, or start-up time.
The OmniBook enters
Standby mode
Saves minimal power.
Turns off only the display.
Restarts quickly.
Restores previous session.
Maintains network connections.
Suspend mode
Saves significant power.
Turns off the display.
Saves current session to RAM.
Restarts quickly.
Restores previous session.
May restore network connections.*
Hibernate mode
Saves maximum power.
Saves current session to disk, then
shuts down.
Restore previous session.
May restore network connections.*
Off mode
Saves maximum power.
Turns off without saving current
session.
Unsaved data will be lost.
blue power button.
When you
Press Fn+S
–or–
allow time-out.
Press blue power button
–or–
close the lid
–or–
select Start, Suspend**
–or–
allow time-out.
Press Fn+F12
–or–
allow time-out.
Select Start, Shut Down
–or–
Press and hold the blue
power button until the
To exit this
mode
Press any key or
move a pointing
device to display
your current
session ("Instant-
On").
Press the blue
power button to
display your
current session
("Instant-On").
Press the blue
power button to
restart and
restore your
previous session.
Press the blue
power button to
restart with a new
session.
11