Table of Contents
Advertisement
2.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the only
wire connected to the tool's grounding system and must never be attached to an
electrically "live" terminal.
3.
Your tool must be plugged into an appropriate outlet, properly installed by a certified
electrician and grounded in accordance with all codes and ordinances.
AN EXTENSION CORD MUST NEVER BE USED WITH THIS ITEM. Use of an
extension cord could result in damage to the item or fire.
When unpacking both boxes, check to make sure all the parts shown on the Parts Lists
on pages 28 through 32 are included. If any parts are missing or broken, please call
Harbor Freight Tools at the number shown on the cover of this manual as soon as pos-
sible.
For technical questions, please call 1-800-444-3353;
SKU 93804
EXTENSION CORDS
SYMBOLOGY
V ~
A
no
xxxx/min.
UNPACKING
Troubleshooting section at end of manual.
Double Insulated
Canadian Standards
Association
Underwriters Laboratories,
Inc.
Volts Alternating Current
Amperes
No Load Revolutions per
Minute (RPM)
Page 10
Hide quick links:
Advertisement
Table of Contents
