Gear Head 1-1DPF100 User Manual page 9

LoadData: This area
allows you to transfer
photos between your
digital
the computer.
8. To delete a photo from your digital keychain, select the photo in the LoadData area,
click "Remove", then click "Synchronize." You will be warned not to disconnect the USB
Cable while downloading data, click "Yes" to continue.
9. After transfer is complete, the PhotoViewer will have a "data synchronize complete"
screen indicating that the photos have been deleted from your digital keychain.
10. To add a photo to your digital keychain, select a photo by browsing your computer. Click
the blue arrow at the bottom of the "Edit" column, the photo will be added to the LoadData
area, then click "Synchronize." You will be warned not to disconnect the USB Cable while
downloading data, click "Yes" to continue.
11. After transfer is complete, the PhotoViewer will have a "data synchronize complete"
screen indicating that the photo has been added to your digital keychain.
keychain and
SaveData: Record the picture shown under the preview
screen onto your computer. Use this to store your most
frequently used pictures so you can quickly reload your
favorite pictures by simply clicking the "LoadData" button.
LoadData: Click this to clear out the preview screen and
show the pictures stored on your computer using the
"SaveData" button.
Synchronize: Transfer data. Note: No change will be made
to your photo frame until this button is clicked.
Save:Save photos from your digital keychain to your
computer.
Remove: Remove photo from LoadData area.
9