Initial Setup; Led Functionality - Cobra drive HD CDR835 User Manual

INITIAL SETUP
When the Dash Cam is powered on for the first time it will force you to enter basic setup
information.
You will be asked to set the Year, Month, Day, Time Zone, Daylight Saving Time, and Time. This
information is needed so that file names will be created correctly and time stamps will be
accurate in your videos.
On subsequent startups the unit will proceed directly to the Video Screen
LED FUNCTIONALITY
The LED Indicator, located near the top left of the screen, communicates charging and
recording status even if the screen is off. LED operation is detailed in the table below:
No Power
Unit ON/ No LED
Screen ON
Unit ON/ Recording : Blinking Red
Screen OFF (1s on-1s off)
No Recording :
Solid Red
Unit OFF No LED
10 | P a g e
Charging
Solid Green
Recording : Blinking Red
(1s on-1s off)
No Recording :
Solid Red
Solid Green
Fully Charged
No LED
Recording : Blinking Red
(1s on-1s off)
No Recording :
Solid Red
No LED