INITIAL SETUP
When the Dash Cam is powered on for the first time, it will prompt you to enter basic setup
information.
You will be asked to set the Language, Year, Month, Day, Time Zone, Daylight Saving Time, and
Time. This information is needed so that file names will be created correctly and time stamps
will be accurate in your videos.
On subsequent startups the unit will proceed directly to the Video Screen.
LED FUNCTIONALITY
The LED Indicator, located near the top left of the screen, communicates charging and
recording status even if the screen is off. LED operation is detailed in the table below:
No Power
Unit ON/
No LED
Screen ON
Unit ON/
Recording : Blinking Red
Screen OFF
(1s on / 1s off)
No Recording :
Solid Red
Unit OFF
No LED
10 |
P a g e
Charging
Solid Green
Recording : Blinking Red
(1s on / 1s off)
No Recording :
Solid Red
Solid Green
Fully Charged
No LED
Recording : Blinking Red
(1s on / 1s off)
No Recording :
Solid Red
No LED