Table of Contents
Advertisement
ITEM
Welding Current
Duty Cycle
Power Consumption
Heat Control Switch on Unit
Ground Cable
Torch Power Cable
Power Cord
Power Cord Plug
Thermal Overload
Welder Tip
Wire Size
Wire Spool Size
Overall Dimensions
Weight
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.
SKU 91124
Specifications
90 AMPs
10%@90AMPs
110VAC, 23 amps
This model is not adjustable
4 AWG, single insulation, 6 foot
8 AWG, single insulation, 6 foot
3-core, double insulated, 14 AWG, U.L. approved
UL Approved
Both settings: 10 min. shutdown, 3 min. back on with Light
0.030"; Spare: Welder Tip 0.035 inch;
Will also accept 0.023" welder tip
0.030 inch flux core wire when using 0.030" Welder Tip
4 inches diameter
14-1/2 (L) x 8-1/2 (W) x 15-1/2 (H) inches
34.45 lbs.
Spare Welder Tip
Welding Face Shield
Wire Brush / Hammer combination
Save This Manual
Safety Warnings and Precautions
Page 2
DESCRIPTION
REV 06/04
Hide quick links:
Advertisement
Table of Contents
