Panasonic PT-VX430 Operating Instructions Manual page 105

Wireless LAN
(Only when the wireless module is attached)
1 [WIRELESS LAN]
Selects [ENABLE] when you want to enable the wireless LAN
function.
2 [SSID]
Sets the SSID for use.
3 [CHANNEL]
Selects the channel for use.
Note
f Changing LAN settings while connected to the LAN may cause the connection to cut out.
f The setting values of the [Network config] page will return to the factory default when the [INITIALIZE] of the [NETWORK/USB] menu is
executed (x page 88) .
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit]
Execute the connection test.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
Chapter 5 Operation of Function - Web control function
4 [ENCRYPTION]
Selects [WPA2-PSK(AES)] when performing encrypted
communications.
5 [KEY]
Sets the key to be used when performing encrypted
communications.
8 to 15 alphanumerics can be input.
6 [Back], [Next]
Click the [Back] button to return to the original screen. The
current settings are displayed by pressing the [Next] button.
1
2
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
1
2
3
4
5
6
3
4
ENGLISH - 105