Bit Holder - Bosch GSB18V-490 Operating And Safety Instructions Manual

2610067277 GSR18V-490 06-21.qxp_GSB18V-490 6/2/21 3:12 PM Page 10
Belt Clip
When the tool is attached
to
yourself to avoid entanglement with
surrounding
entanglement could cause the tool to fall
resulting in injury to the operator or
bystanders.
The belt clip accessory will allow you to
conveniently attach your tool to your belt. This
feature will allow you to have both hands free
when climbing a ladder or moving to another
work area.
The belt clip can be attached to either side of
the tool by securing it with a mounting screw.
Always make sure you securely tighten the
mounting screw before use (Fig. 5).
To use clip, turn tool upside down and attach
to your belt.
FIG. 5
10
the belt, position
objects. Unexpected
BELT CLIP
SAVE THESE INSTRUCTIONS
4X Bit Tip Holder
Store only bit tips in the on-
tool bit holder. Longer bits
could interfere with proper tool operation and
result in user injury.
The four piece bit tip holder can be used for
convenient on tool storage of your most
commonly used bits.
When mounting bit holder accessory, mount on
the side of the drill opposite the belt clip.
Always make sure you securely tighten the
mounting screw before use. (Fig. 6).
FIG. 6

BIT HOLDER