Table of Contents
Advertisement
Using the Menus
Using the PC Settings
Option
Wide Mode
Reset
Auto Adjustment
Phase
Pitch
Horizontal Center
Vertical Center
Power Management
36
Description
Normal
Select to display in the original image size.
Full1
Select to enlarge the picture to fill the display area, keeping its original
aspect ratio.
Full2
Select to enlarge the picture to fill the display area.
Wide Mode can also be accessed using the WIDE button on the remote control.
Resets the current setting to the default values, except Wide Mode and Power
Management.
Select to automatically adjust the display position and phase of the picture when the TV
receives an input signal from the connected PC. Note that Auto Adjustment may not work
well with certain input signals. In such cases, manually adjust the options below.
Auto Adjustment for PC can also be set using the TOOLS button on the remote
control.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
For the PC Input Signal Reference Chart, see page 43.
Allows you to move the position of the picture left and right.
Press B/b and press
Allows you to move the position of the picture up and down.
Press V/v and press
On
Select to automatically switch to the standby mode when there is no
signal input for 30 seconds.
Off
Select to turn off Power Management.
Power Management is not VESA-compliant.
PC Settings
to adjust.
to adjust.
Wide Mode
Normal
Reset
Auto Adjustment
Phase
0
Pitch
0
Horizontal Center
0
Vertical Center
0
Power Management
Off
A
A
Resolution: 1024x 768/60Hz
D
D
Select:
Set:
Video 8
Back:
Exit:
RETURN
MENU
Advertisement
Table of Contents
