Channel Set-Up Menu - Sony BRAVIA KLV-22S570A Operating Instructions Manual

PC Input Signal Reference Chart for supported signals and "Resolution:" value displayed
Signals Horizontal (Pixel)
VGA 640
640
720
SVGA 800
800
XGA 1024
1024
1024
WXGA 1280
1280
1360
• This TV's PC input does not support Sync on Green or Composite Sync.
• This TV's PC input does not support interlaced signals.
• If input signal is not shown in above chart, then this signal may not be displayed properly or cannot be displayed according
to your settings.
z • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical
frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected
automatically.

Channel Set-up menu

1 Digit Direct
Favourite Set-up
Auto Tuning
Programme Sorting
Programme Labels
Programme Block
Vertical (Line)
480
480
400
600
600
768
768
768
768
768
768
When "1 Digit Direct" is set to "On", you can select a channel using one preset number
button (0 - 9) on the remote.
• When "1 Digit Direct" is set to "On", you cannot select channel numbers 10 and above
entering next digit using the remote.
Allows you to set your favourite channels by assigning the desired channel numbers.
F f
1
Press / to select your favourite channel number, then press
F f
2
Press / to select your desired channel, then press
To reset the Favourite channels
Select "_ _", then press
Repeat the procedure above to set other favourite channels.
Tunes in all the available channels. This option allows you to retune the TV after moving
house, or to search for new channels that have been launched by broadcasters.
Changes the order in which the channels are stored on the TV.
F f
1
Press / to select the channel you want to move to a new position, then press
F f
2
Press / to select the new position for your channel, then press
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected.
F f
1
Press / to select the channel you want to name, then press
F f
2
Press / to select the desired letter or number ("_" for a blank space), then press
g
.
If you input a wrong character
G g
Press / to select the wrong character. Then, press
character.
To delete all the characters
Select "Reset", then press
3
Repeat the procedure in step 2 until the name is completed.
4
Select "OK", then press
Blocks an individual channel from being watched.
F f
1
Press / to select the channel you want to block, then press
F f
2
Press / to select "Block", then press
Horizontal Vertical
frequency frequency
(kHz) (Hz)
31.5
37.5
31.5
37.9
46.9
48.4
56.5
60
47.4
47.8
47.7
.
.
.
. To watch the channel, select "Allow".
Standard
60 VESA
75 VESA
70 VESA
60 VESA
75 VESA
60 VESA
70 VESA
75 VESA
60 VESA
60 VESA
60 VESA
.
.
.
.
F f
/ to select the correct
.
Continued
.
21
GB