Table of Contents
Advertisement
Playing a DVD
Playback Setup
1. Turn on the TV and select the video input source
connected to the DVD player.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD player.
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the play-
back side down.
4. Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead:
DVD
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
Notes:
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 25.)
• DVDs may have a region code. Your player does
not play discs that have a region code different from
your player. The region code for this player is 2
(two).
• To watch a DVD during timer recording standby
mode, press POWER and DVD to switch to DVD
mode.
30
General Features
Note:
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.
DVD
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is
stopped then the appropriate number (0-9) or use
b / B to move to another title.
You can play any title by inputting its number while
playback is stopped.
Moving to another CHAPTER/TRACK
DVD
DivX
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to anoth-
er chapter/track as follows:
•
Press . or > briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
•
Press . twice briefly to step back to the
previous chapter/track.
•
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
DVD
DivX
Search
1. Press and hold . or > for about two seconds
during playback.
The player will now go into SEARCH mode.
2. Press and hold . or > repeatedly to select
the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
3. To exit SEARCH mode, press PLAY.
.
Advertisement
Table of Contents
