Section B; Safety Tips For Operation - Toyotomi Toyostove Laser 60AT Installation & Operation Instructions

Laser clean heating system/vented heater
Hide thumbs Also See for Toyostove Laser 60AT:
Table of Contents

Advertisement

SECTION B:

SAFETY TIPS FOR OPERATION

CAUTION:
Heater and vent pipe system must be properly installed before operation.
Please follow instructions under "Installation", Section I.
1.
Never use any fuel other than clear or red colored kerosene (ASTM D3699
1-K Kerosene, ASTM D396 Low Sulfur No.1 Fuel Oil, or ASTM D975 Ultra
Low Sulfur Diesel (ULSD)). NEVER USE GASOLINE. Use of gasoline can
lead to uncontrollable flames, resulting in destructive fire.
2.
Due to high surface temperatures, keep heater away from children, furniture
and clothing while in operation (See Page 24).
3.
To prevent abnormal operation and prolong heater life, be sure to perform
routine maintenance (See Pages 12-13).
4.
Never store or transport kerosene in other than a metal or plastic container
that is (1) acceptable for kerosene, (2) non-red in color, and (3) clearly
marked, "KEROSENE", "No.1 FUEL OIL", or "ULTRA LOW SULFUR DIESEL".
Never store fuel in the living space.
5.
Operating Temperature Range
Use heater within the range of temperatures
indicated in the right figure.
Point A:
If outside temperature -20°F
than room temperature has to be 0°F or above
Point B:
If outside temperature -45°F
than room temperature has to be 60°F or above
4
RIGHT
KEROSENE
KEROSENE
A
-20
Operating Range
-25
-30
-35
-40
-45
0
20
Room Temperature (˚F)
WRONG
GAS
Danger
Kero-
sene
B
40
60

Advertisement

Table of Contents
loading

Table of Contents