Table of Contents
Advertisement
4. With the "TOP" orientation indicator facing upwards, insert
the lens into the lens mount.
Align the flange on the upper portion of the lens with the catch
on the left side of the lens mount.
NOTE:
• Insert the lens carefully to avoid it from damage by knocking against
the lens mount.
5. Turn the lens clockwise until it clicks into place.
The 3 flanges have now engaged with the 3 catches and the
lens unit has been mounted.
• To lock the lens unit see "Using the lock mechanism" on the
previous page.
6. Mount the lens hood to the front panel.
(1)Align the lens hood to the front panel. If the hood does not
fit into the front panel, move it left and right until it is aligned
properly.
(2)Turn the lens hood clockwise or counterclockwise until the
screw holes of the lens hood are aligned with the screw holes
of the front panel.
The hooks in the rear will engage with the front panel flange.
(3)Tighten the 2 screws removed in Step 1 by your fingers.
6. Installation and Connections
123
Advertisement
Table of Contents
