Philips Multigroom MG7770/15 Manual page 11

1
2
Quick charge
Using the appliance
Detaching and attaching cutting elements
2
1
charged for 3 hours, it has a cordless operating
time of up to 5 hours.
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall outlet and pull the small plug out of the
appliance.
After approx. 5 minutes charging, the appliance
contains enough power for one cordless trimming
session.
Note: This appliance can only be used without
cord.
Note: Switch off and clean the appliance after each
use.
1 To detach a cutting element, push upwards
against the teeth of the cutting element and
take it off the handle.
2 To attach a cutting element, insert the lug of the
cutting element into the guiding slot at the front
and push the back of the cutting element onto
the appliance ('click').
11
English