Computer Feet; Memory Module - HP Compaq Presario,Presario V6500 Maintenance And Service Manual

Computer feet

Description
Rubber Kit (includes base enclosure rubber feet and display bezel screw covers)
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
illustrated below.

Memory module

Description
2048-MB (PC2-5300, 667-MHz, 1-DIMM)
1024-MB (PC2-5300, 667-MHz, 1-DIMM)
512-MB (PC2-5300, 667-MHz, 1-DIMM)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory/WLAN module compartment
1.
cover to the computer.
Battery on page 42).
Spare part number
431431-001
Spare part number
453774-001
446495-001
446494-001
Component replacement procedures 45