Restoring Default Settings In The Setup Utility - HP Compaq Presario,Presario V2000 Hardware And Software Manual

Restoring Default Settings in the
Setup Utility
The following procedure explains how to restore the Setup utility
default settings. If the notebook is not in the Setup utility, begin at
step 1. If the notebook is in the Setup utility, begin at step 2.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
enter setup" is displayed in the lower-left corner of the screen.
2. Select Exit > Load Setup Defaults, and then press
3. When the Setup Confirmation is displayed, press
your preferences.
4. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
The Setup utility default settings are set when you exit the Setup
utility and are in effect when the notebook restarts. Identification
information, including ROM version information, is retained.
Hardware and Software Guide
Software Updates and Recovery and System Software
f10
while the prompt "Press <F10> to
.
f10
to save
enter
,
f10
8–15