Hardware Upgrades And Replacements; Device Connections; Connecting A Powered Device - HP Compaq Presario,Presario V2000 Hardware And Software Manual

Hardware Upgrades and

Device Connections

Connecting a Powered Device

To connect the notebook to an optional external device that has a
power cord:
1. Be sure the device is turned off.
2. Connect the device to the jack or jack on the notebook
specified by the device manufacturer.
3. Plug the device power cord into a grounded AC outlet.
4. Turn on the device.
✎
If a properly connected monitor or other display device does
not display an image, try pressing the
image to the new device.
To disconnect a powered external device from the notebook:
1. Turn off the device.
2. Disconnect the device from the notebook.
Hardware and Software Guide
Replacements
hotkey to switch the
fn+f4
7
7–1