Navigating And Selecting In Setup Utility; Displaying System Information - HP Compaq Presario,Presario CQ62-220 Maintenance And Service Manual

3. Use the arrow keys to select a language, and then press
4. When a confirmation prompt with your language selected displays, press the
5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the
Changes goes into effect immediately.

Navigating and selecting in Setup Utility

Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
● To choose a menu or a menu item, use the arrow keys.
● To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or the
● To select an item, press the
● To close a text box or return to the menu display, press the
●
To display additional navigation and selection information while Setup Utility is open, press the
f1 key.

Displaying system information

The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the
the Startup Menu displays, press
2. Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press the
enter key.
f5 or f6 keys.
enter key.
thef10
enter key.
esc
key.
enter key.
enter key.
key.
f10 key.
esc key. When
Computer Setup in Windows 7 89