Displaying System Information; Restoring Default Settings In The Setup Utility - HP Compaq Presario,Presario C300 User Manual

Displaying system information

The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in Windows, and then press
prompt, "Press <F10> to enter setup," is displayed in the lower-left corner of the screen.
2. Access the system information by using the Main menu.
3. To close the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter. (The computer restarts in Windows.)

Restoring default settings in the Setup Utility

The following procedure explains how to restore the Setup Utility default settings. If the computer is not
in the Setup Utility, begin at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in Windows, and then press
prompt, "Press <F10> to enter setup," is displayed in the lower-left corner of the screen.
2. Select Exit > Load Setup Defaults, and then press f10.
3. When the Setup Confirmation is displayed, press
4. To set your preferences and exit the Setup Utility, press f10, and then follow the instructions on
the screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the
computer restarts.
NOTE
factory default settings.
4 Chapter 2 Using the Setup Utility
Your password, security, and language settings are not changed when you restore the
enter to save your preferences.
f10 while the
f10 while the
ENWW