3.3.2 System Programming
3.3.2 System Programming
[000] Date & Time
The proprietary telephones display the current date and time while on-hook.
0
0
0
Enter 000.
•
After changing the desired values, you can press the ENTER button. You do not have to
perform the rest of the steps.
•
The clock starts immediately after the ENTER button is pressed.
•
You cannot leave a value empty.
•
You can clear the entry by pressing the CLEAR button.
•
To confirm your entry after storing data:
–
The STORE button light: Lights red
–
Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
182
Operating Manual
year
Press ENTER.
Enter year
(00–99).
Press ENTER.
Press NEXT.
To end
END
(HOLD)
Press ENTER.
Press END.
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Press SELECT
Press Right.
for month.
hour
minute
Enter hour
Enter minute
(01–12).
(00–59).
date
Enter date
(01–31).
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Press SELECT
to choose AM or PM.
Document Version 2008-10