Basic Operations; Setup Wizard - JVC Emerald Series User Manual

Setup Wizard

The Setup Wizard will assist you with setting
up your TV for the first time. Please follow the
instructions carefully.
Note: If you would like to setup over-the-air or cable
programming, make sure the antenna or cable TV system
is connected.
1
When you turn on the TV for the first time, the
Setup Wizard screen will appear.
Select the menu language, then press OK.
Menu Language
Language Selection
Language:
OK
Change
2
Select the TV Mode, then press OK.
TV Mode options:
Retail Mode: Select this mode for in store
demo.
Home Mode: Select this mode for in
home mode.
TV Mode
Mode Selection
Mode:
Change OK
Note: Retail Mode is for retailers only.
To exit Retail Mode, see page 18.
20

Basic Operations

English
INFO
Select
Retail Mode
Select RETURN Previous Step INFO
3
Select Time Zone, then press OK.
4
Set Daylight Saving Time "ON" or "OFF", then
press OK.
Exit
5
Select the TV service, then press OK.
Move
Exit
Time Zone
Select the Time Zone
Alaska
Time Zone:
OK RETURN
Change Select Previous Step
Daylight Saving
Daylight Saving Selection
Daylight Saving: On
Change OK Select RETURN Previous Step
Auto Scan
Select the Signal Type of your TV input
and start auto scan.
Signal Type: Cable
Start Scan
OK RETURN
Change Select Previous Step
INFO
Exit
INFO Exit
INFO
Exit