Identifying Parts Of The Notebook - HP Compaq Presario,Presario 1110 Startup Manual

Getting Started with Your Notebook
CAUTION: To reduce the risk of fire, use only No. 26 AWG or
larger telecommunications line cord to connect a modem to the
telephone wall jack. In Australia, the notebook must be connected
to the Telecommunication Network through a line cord that meets
the requirements of ACA Technical Standard TS008.
When using your notebook with a telephone connection, always
follow basic safety precautions to reduce the risk of fire, electrical
shock, and injury to persons.
Do not use this product with a telephone connection near
water (for example, near a bathtub, sink, swimming pool,
or in a wet basement).
Avoid using a telephone connection (other than a cordless
type) during an electrical storm. There may be a remote risk
of electrical shock from lightning.
Do not use a telephone connection to report a gas leak in the
vicinity of the leak.
Use only the power cord and battery packs indicated in this
guide. Do not dispose of battery packs in a fire. They may
explode. Check with local codes for possible special disposal
instructions.
Disconnect the modem cable before opening the notebook
case or touching an uninsulated modem cable, jack, or
internal component.
Do not plug a modem cable or telephone cable into the
network (LAN) receptacle.

Identifying Parts of the Notebook

Components included with the notebook may vary by
geographical region and the features you selected. The following
illustrations identify the standard external components included
with most notebook models.
Find the illustrations that match your notebook to identify your
components.
1–2 Startup Guide