Restoring Factory Settings In Computer Setup - HP Compaq NX7300 Maintenance And Service Manual

3. To exit Computer Setup, choose one of the following
methods:
❏
❏
Your preferences go into effect when the computer restarts.
Restoring Factory Settings in Computer
Setup
To return all settings in Computer Setup to the values that were
set at the factory, follow these steps:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
2. Use the arrow keys to select File > Restore defaults, and
then press
3. When the confirmation dialog box opens, press
4. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit. Then
follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
✎
Your password settings and security settings are not changed
when you restore the factory settings.
Maintenance and Service Guide
To exit Computer Setup without saving your preferences,
use the arrow keys to select File > Ignore Changes and
Exit. Then follow the instructions on the screen.
To save your preferences and exit Computer Setup, use
the arrow keys to select File > Save Changes and Exit.
Then follow the instructions on the screen.
.
enter
while the "F10 = ROM Based
f10
Troubleshooting
.
f10
2–3