Creating Recovery Discs - HP Compaq NX7300 Maintenance And Service Manual

Creating Recovery Discs

After setting up the computer for the first time, be sure to create a
set of recovery discs of the full factory image. The recovery discs
are used to start up (boot) the computer and recover the operating
system and software to factory settings in case of system
instability or failure.
Note the following guidelines before creating recovery discs:
■
You will need high-quality CD-R, DVD-R, or DVD+R
media (purchased separately).
✎
■
The computer must be connected to AC power during the
process.
■
Only one set of the recovery discs can be created per
computer.
■
Number each disc before inserting it into the optical drive of
the computer.
■
If necessary, you can cancel the disc creation before you have
finished creating the recovery discs. The next time you select
Create factory software recovery CDs or DVDs to recover
the system (Highly recommended), you will be prompted to
continue the disc creation.
Maintenance and Service Guide
Backup and Recovery in
Formatted DVD±RW discs and DVD±RW double-layer
discs are not compatible with HP Backup and Recovery
Manager.
Windows XP
C
C–1