HP Compaq NW8240 Maintenance And Service Manual page 111

8. Remove the following:
1 Two PM3.0×5.0 screws
2 Two PM3.0×4.0 screws
3 Two PM1.5×4.0 screws
9. Lift the frame 4 straight up to remove if from the hard drive.
10. Remove the hard drive connector 5 from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to reassemble and install the
hard drive.
Maintenance and Service Guide
Removal and Replacement Procedures
6–9