Use Remote Access; Connect To Your Router With Anywhere Access - NETGEAR RAX45 User Manual

• Only This Computer. Allow access from a single IP address on the Internet. Enter
the IP address to be allowed access.
• IP Address Range. Allow access from a range of IP addresses on the Internet.
Enter a beginning IP address and an ending IP address to define the allowed
range.
• Everyone. Allow access from any IP address on the Internet.
7. Specify the port number for accessing the router web interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote router web interface. Choose
a number from 1024 to 65535, but do not use the number of any common service
port. The default is 8443, which is a common alternate for HTTP.
8. Click the Apply button.
Your settings are saved.

Use remote access

To use remote access:
1. Launch a web browser on a computer that is not on your home network.
2. Type your router's WAN IP address into your browser's address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8443, enter http://134.177.0.123:8443 in your browser.
Connect to your router with Anywhere
Access
The Anywhere Access feature on the Nighthawk app allows you to connect to your
router when you're away from home and change its settings. Before you can use the
Anywhere Access feature on the Nighthawk app, you must update your router's firmware
and download the latest Nighthawk app for your mobile device.
For more information about how to update your router's firmware, see Check for new
firmware and update the router on page 93.
To download the latest Nighthawk app for your mobile device, visit
https://www.netgear.com/home/apps-services/nighthawk-app/.
Manage Your Router
Nighthawk AX6 6-Stream AX4300 WiFi Router
106 User Manual