Appendix A: System Rom Versions; Determining The Rom Version Using Setup; Determining The Rom Version Using Hp Diagnostics For Windows - HP Compaq NC4000 Software Manual

Appendix A: System ROM versions

Determining the ROM version using Setup

Note
The ROM versions listed in this document are current as of the white paper
publication date.
Use the HP Setup utility or HP Diagnostics for Windows to determine the system ROM version. Refer to
Table 2 for the current ROM version.
Table 2 ROM versions
Portable family
HP Compaq nc4000/nc4010
HP Compaq nc6000
HP Compaq nc8000
HP Compaq nx5000
HP Compaq nx7000/7010
HP Compaq nx9000
HP Compaq nx9005
HP Compaq nx9010
HP Compaq nx9105
HP Compaq nx9100/9110
!
A block cursor displays in the upper right corner of the screen during startup.
Press F10 when the block cursor displays.
1.
Scroll down using the down arrow key to highlight View System Information and press Enter.
2.
The System Information prompt appears.
Make note of the ROM date and compare it to the date in Table 2.
3.
Press Esc to exit the ROM information screen.
4.
Scroll down using the down arrow key until Exit without Saving Changes is highlighted.
5.
Press Enter.
Press F10 to confirm exiting the HP Utilities.
6.
If the ROM requires upgrading and the ROMPaq diskette is not available, see "Creating a
7.
ROMPaq Diskette" in this appendix. Otherwise, proceed to "Upgrading the ROM."

Determining the ROM version using HP Diagnostics for Windows

If Diagnostics for Windows is installed on the notebook PC, the following steps can be used to
1.
determine the ROM version.
Click Start Settings Control Panel.
2.
Double-click the Diagnostics icon.
3.
Click the system icon (the leftmost icon on the icon bar near the top of the window).
4.
Scroll through the list until the System ROM information appears. Make note of the ROM version
5.
and compare it to listings in Table 2.
Current ROM version
F.2A
F.0F
F.0F
F.0B
F.42
KG.M1.17
KA.M1.59
KH.F.23
F.12
F.21
5